Transparent polyamideTORGAMID® myCX eCO
- HOME
- TORGAMID® myCX eCO
Microcrystalline transparent Polyamide
TROGAMID® myCX eCO is is microcrystalline transparent Polyamide for injection molding and is suitable for optical applications such as lenses.
This grade reduces CO2 emissions by up to 50% in its manufacturing process.
This grade is a spherical pellet in a moisture-proof bag and you can use it immediately after opening.
The results are showed from a small number of production lots.
Therefore, those results are no guranteed.
Therefore, you should not use these results to establish a specification.
The quality guarantee period is separately specified.
| Applications | Sports ＆ Lifestyle |
|---|---|
| Molding Methods | Injection molding, Extrusion molding |
| Color | Natural |
| Shapes | Granules |
| Characteristics | High Transparency, Optics |
Property
| Items | Condition | Test Method | Unit | TORGAMID® myCX eCO |
|---|---|---|---|---|
| Melting point | - | ISO 11357-3 | ℃ | 250 |
| MVR | 190℃, 2.16kg | ISO 1133 | cm3/10min | - |
| 230℃, 2.16kg | cm3/10min | 1 | ||
| Tensile modulus | 23℃50%Rh | ISO 527-1,2 | MPa | 1,400 |
| Tensile stress at yield | MPa | 60 | ||
| Elongation at yield | % | 8 | ||
| Flexural modulus | ISO 178 | MPa | 1,400 | |
| Flexural strength | MPa | 52 | ||
| CHARPY impact strength (23℃) | ISO 179/1eA | kJ/m2 | NB | |
| CHARPY impact strength (-30℃) | kJ/m2 | NB | ||
| CHARPY notched impact strength (23℃) | kJ/m2 | 14C | ||
| CHARPY notched impact strength (-30℃) | kJ/m2 | 11C | ||
| Shore D hardness | - | ISO 868 | - | - |
| Heat deflection temperature | 1.8MPa | ISO 75-1,2 | ℃ | - |
| 0.45MPa | ℃ | - | ||
| Relative permittivity | 23℃, 100Hz | IEC 62631-2-1 | - | - |
| 23℃, 1MHz | - | - | ||
| Dissipation factor | 23℃, 100Hz | 10-4 | - | |
| 23℃, 1MHz | 10-4 | - |